0.6KW Spot Welding Machine For Battery Pack DC 10000A Transistor Welding Power

Main Function:

Cylindrical battery, Prism battery, Polymer battery Pneumtic spot welding with  nickel sheet

Welding range:
Power battery, digital battery, NiMH nickel-nickel chromium battery, electronic rotor, electronic and electrical accessories, etc

Feature:

► The equipment is beautiful and firm structure

► The welding point is beautiful, with less sparks, and the nickel sheet is not black after welding

► Using inlet low impedance capacitance and inlet low impedance MOS pipe, the welding voltage and current output are stable

► FPGA high speed voltage chip is used to detect the output current and voltage in real time

► Bring own over current or over pressure, under current or under pressure alarm

► This machine has a 5-inch DMT80480T050-16WT touch-type display

► The 7-inch DMT80480T070-18WT touch display can be mounted

► The pressure of the two welding pins is adjusted independently to ensure the stable and reliable welding pressure

► The output current direction flows from the positive to the negative

► preheating current, welding current and cooling can be set

► With the function of slow rise and slow lowering, it can inevitably produce splash during welding and meet the welding requirements of special materials

► Easy to install and use, the overall equipment is light

► Spot welding data acquisition can collect welding data via RS485 or RS232

► External industrial controller / PLC control and cooperate with automatic machine production

► During the operation, if the controller detects the situation abnormality, it will automatically turn off the output and alarm the prompt

► The control signal adopts the foot stepping switch or the external control

► The equipment has its own fault alarm and clear the fault according to the prompt

► The machine warranty period is two years, and the faulty technician will handle it within 24 hours

    Use the BT independently developed Max 10000A Transistor spot welding power supply

                                                             FAQ                                                       

A: How can i install and operate the machine by myself?

B: Our system R&D based on intearated development viewwhen you get the machine, just need to connect it with the electrical power, then machine can be working. because the English software were installed in thismachine.what you need to do is only learning the software usage,and the complete English user manual will be coning to you with the machine.

A: How to order?

B: Please send us your purchase order by email or call us salesor we can make the proforma invoice under your request.We need to know the following information for your order before sending your PI.

A: What's the warranty for the items?

B: We are very confident in our productsand we pack them very well, so usually you will receive your order in good condition.any quality issue,we will deal with it immediately.Warranty for equipment is a year (24months) if the equipment parts are damageddue to non human factors within one year, we will provide replacement parts free of charge.

A: What scope does the product apply to?

B: Company 13 years committed to column Battery Pack Automation Production Equipment, and column Battery Pack Automation Production Line. Products are mainly used in digital batteries, energy storage batteries, tool batteries,power batteries, automotive batteries, etc.